Mechanical Plan Review Requirements
1.
Provide site plan showing to scale
the size and location of all new
construction and all existing
structures on the site,
distances from lot lines,
established street grades and
the proposed finished grades. The site
plan shall be drawn in
accordance with an accurate boundary line survey
2. Provide
two (2) sets of plans and specifications signed and sealed by a registered
design professional licensed in the state where the
construction is to
performed. The following information, when applicable, shall be provided:
·
Location and size of equipment.
·
Air distribution and return air system.
·
Ventilation and exhaust schedule(s).
·
Duct detection system.
·
Combustion air.
·
Gas piping diagram.
·
Oil piping diagram.
·
Hydronic piping diagram.
·
Chimney system.
·
Vent system.
·
Design calculations.
·
Floor plan(s) of systems and piping.
·
Material designation.