Electrical Plan
Review Requirements
1.
Provide site plan
showing to scale the size and location of all new
construction and all existing
structures on the site, distances
from lot
lines, established street grades
and the proposed finished grades.
The
site
plan shall be drawn in accordance
with an accurate boundary line survey.
2. Provide two (2) sets of plans and specifications signed and sealed by
a
registered design
professional licensed in the state where the construction
is
to be performed. The following information, when applicable, is to be
provided:
·
Location of electrical devices: lighting, receptacles,
switches,
equipment, appliances, transformers, panels and
subpanels.
·
Size, type and number of conductors in conduit and
raceway.
·
Size and type of conduit and raceway.
·
Panel and subpanel schedule with load calculations.
·
Single line diagram
·
Load calculations for service equipment.
·
Size, locations and type of connection for ground wires
and connectors
·
Emergency lighting and exit signs
·
Location of GFCI receptacles.
·
Size and demand of electrical appliances, equipment and
devices
·
Grounding and overcurrent protection systems