Building Plan
Review Requirements
1. Provide
site
plan showing to scale the size and location of all new
construction and
all existing
structures on the site, distances
from lot lines,
established street grades
and the proposed finished grades. The site
plan
shall
2.
Provide one copy of the following report, signed and sealed by a licensed
professional engineer or design professional shall be provided:
·
Geo-technical report or soil investigation with any recommendations.
3.
Provide two (2) sets of plans and specifications signed and sealed by a
registered design professional licensed in the state where the
construction
is to be performed. The following information, when applicable, shall
be
provided:
·
Front,
rear and side elevations
·
Type(s)
construction
·
Use
group(s) and use of each area or room
·
Occupant
load of each area or room
·
Means
of egress plan
·
Rated
assembly details with design numbers
·
Window,
door and finish schedule
·
Design
loads and design calculations
·
Shop
and prefabricated component drawings
·
Wall,
floor, roof & foundation sections
·
Details,
connections and material designation